Difference between revisions of "Urban Start-up Agglomeration and Venture Capital Investment"
| Line 1: | Line 1: | ||
{{AcademicPaper | {{AcademicPaper | ||
|Has title=Urban Start-up Agglomeration and Venture Capital Investment | |Has title=Urban Start-up Agglomeration and Venture Capital Investment | ||
| − | |Has author=Ed Egan | + | |Has author=Ed Egan,Jim Brander |
|Has RAs=Peter Jalbert, Jake Silberman, Christy Warden, Jeemin Sim | |Has RAs=Peter Jalbert, Jake Silberman, Christy Warden, Jeemin Sim | ||
|Has paper status=Working paper | |Has paper status=Working paper | ||
}} | }} | ||
| − | |||
=New Work= | =New Work= | ||
Revision as of 16:45, 5 October 2020
| Academic Paper | |
|---|---|
| Title | Urban Start-up Agglomeration and Venture Capital Investment |
| Author | Ed Egan, Jim Brander |
| RAs | Peter Jalbert, Jake Silberman, Christy Warden, Jeemin Sim |
| Status | Working paper |
| © edegan.com, 2016 | |
Contents
- 1 New Work
- 2 Ed's Big Effort
- 2.1 Target Journal
- 2.2 Files
- 2.3 vcdb4
- 2.4 Analysis and Exploration
- 2.5 Results
- 2.6 CoLevelForCircles
- 2.7 HCA
- 2.8 Layers and levels
- 2.9 Approach
- 2.10 Image Analysis
- 2.11 First Estimation(s)
- 2.12 TIF data
- 2.13 TIF Analysis
- 2.14 Density Maps
- 2.15 Other
- 3 Old Work Using Circles
New Work
Big things:
- Q: What is this technique for? A: Endogenous selection!
- Q: Why cities? A: They are just foundational geographies. We might be able to do this starting with the entire US for a year.
- Big problems with last version:
- Ed's choice of language, especially using GIS terms.
- Lack of focus. The paper does too many things!
- Get Jim set up on the infrastructure: Wiki account, RDP account, etc.
Other notes:
- Ed to fix the % unclustered definition.
- Send Jim Wald method justification
Proposed title:
- A new method for estimating the pattern and efficiency of agglomeration with an application to venture-backed startups.
- A new method for identifying and mapping spatial agglomeration with an application to venture-backed startups
Note: We had discussions on mapping vs. delineating, startups vs. ecosystem, and other tradeoffs.
4 or 5 value-added points by Ed:
- Transform the problem of how to find and delineate agglomerations into the problem of selecting the right lens with which to view agglomerations
- Endogenously determine the location and boundaries of agglomerations
- Examine agglomeration at any scale, including microgeographic scales (i.e., 10s or 100s of meters). This is important as we think that some sectors, like high-growth high-tech startups, have microgeographic agglomerations.
- Produce maps of agglomerations so we can examine their characteristics (socio-economics, demographics, physical, etc.) and facilities (e.g., parks, coffee shops, etc.) of agglomerations without including irrelevant areas. The results have policy implications.
- Allow estimation of continuous changes in spatial characteristics on agglomeration economies.
- Determine the equilibrium, where costs (from increased competition over scarce resources) and benefits (from reduced transportation costs) are in balance, and understand its policy implications.
- Conduct policy simulations by demarking some area as an innovation district and exploring the effects of relocating startups into it.
- In the context of venture-backed startups, agglomeration economies are as powerful as scale effects but easier and cheaper to achieve with policy.
The revision will be built around a public-policy hook, which pervades these points.
Questions and Answers
- What's the method: Ward's method in reverse. Always add another cluster!
- How do we select the best layer for our purpose:
- Our purpose is to identify/delineate agglomeratons within a CDP
- We use lowest-highest layers, which correspond to unique hull counts with 'stable' hulls, in a regression at the CDP level, with a performance measure (next year's venture investment) as the dependent variable.
Ed's Big Effort
A version of the new paper, with the Houston narrative as the motivation, is available from SSRN: https://papers.ssrn.com/abstract=3537162
The Management Science submission version (see below) has a more conventional front end and is as follows:
Target Journal
High-end options might include:
- Science: See https://science.sciencemag.org/content/347/6222/606
- Management Science: There's a special issue which might be a fit [1], but otherwise the E&I track is probably the obvious choice [2]. Editors are Ashish, Toby and Sridhar Tayur: https://pubsonline.informs.org/page/mnsc/editorial-board
- JPE: https://www.journals.elsevier.com/journal-of-public-economics
- Journal of Economic Geography: https://academic.oup.com/joeg
Other possibilities:
- Journal of Regional Science
- Journal of Urban Economics
- Regional Science and Urban Economics
- Regional Studies
- Regional Science Policy and Practice
Submission
The paper was submitted to Management Science under Toby Stuart on the 26th March 2020. Toby immediately requested a change to the framing and the paper was resubmitted on April 6th. It was then sent out for review. I think I drew Josh Gans as an A.E. The paper was rejected on June 25th with the following note from Toby:
I have received four reviews and an Associate Editor report on your paper. I am very sorry to inform you that three of the four reviewers and the AE recommend against proceeding with the manuscript. All readers find this to be a really thought-provoking piece of work and I'd say there is a consensus that it falls into the "valiant try" category. it presents a novel idea and it got everyone thinking, but in the end, it is also is too much of a kluge and too difficult to follow to proceed with a revision, given the reviewers' doubts that the project is one round of revision away from a successful outcome.
Files
New files are in E:\projects\agglomeration
- agglomeration.sql -- new main sql file for vcdb3
- AgglomerationVcdb4.sql -- even newer main sql file for vcdb4
Contents of the Old Code subdirectory:
- Agglomeration.SQL -- This was the replacement code that was run when vcdb3 was made. We had to work through it to update the counts. Came from E:\projects\vcdb3\OriginalSQL\Agglomeration.SQL
- Agglomeration.sql -- Old version that makes colevel data for python script. Came from E:\mcnair\Projects\Agglomeration
- Analysis.sql -- Old version builds from HCL forward. Came from E:\mcnair\Projects\Agglomeration
See also:
vcdb4
The Vcdb4 rebuild is done with the script AgglomerationVcdb4.sql in E:\projects\agglomeration
It needs:
- portcomaster -- built in new BuildBaseTables
- tiger2 -- built in AgglomerationVcdb4.sql from TigerModified, which combines 7 encapsulated places with their encapsulators (see section below).
- portcogeo -- built in load tables and modified there to create lat4 and long4, which have 4dp (11.1m) of precision, which wikipedia lists as a land parcel and roughly corresponds to an office front.
- roundsummary ->placeyearvc -- Roundsummary doesn't exist anymore. We'll build placeyearvc from a different base
- rankingfull -- Requires deciding how to deal with places (see below).
- Cpi - done in Load.sql
When doing the synthetics for Houston, we need a central location and hull size. The 2007 hull centroid was at (long,lat=-95.47029505572422,29.745008286648368). The WeWork in The Galleria on Westheimer is at (-95.4765668, 29.7256031). We'll use a scaling hull size of 1 hectare per startup. For a 25 hectare district, we would do sqrt(25)/2 as the plus-minus in hm, where 1 hm is 0.0000898 degrees (at the equator for latitude). Or more broadly, the degree +/- for an x hectare district is:
+/- = ((sqrt(x)/2)*0.0000898)
Other notes:
- This build also attempts to incorporate American Community Survey (ACS) Data.
- The level code was taken out of the main SQL file and moved to ExcessCode.sql.
- The elbow calculation was done using elbowdata, not elbowdatarestricted. The workings are in E:\projects\agglomeration\Elbow.xlsx. Plot fracunclustered (X) against avgfracinhull (Y), and fit a cubic to give: 2.8485 x^3 - 3.3892 x^2 - 0.43^x + 1.0373≈-0.0553263 at x≈0.425704 [3]
- The Chosen Hull Layer can't be done until after the STATA analysis has been run, so for the first pass these tables are created empty. The code will have to be re-run from line 1200 onwards to add this in, recomputer the layer distances, and update the master dataset later.
- The TIF data processing was taken out of the main file. It was moved to E:\projects\agglomeration\TIF\TIF.sql.
- The old Houston code was largely redundant after the rebuild, but it was taken out to ExcessCode.sql, as was the diagnostic code that followed it.
Still to do:
- ACS variables - Just needs a join!
- Run and add in chosen layers!
Analysis and Exploration
Choose LHS variable:
- Growth VC: Growthinv17lf -- Rather than seed, less shocky. Forward one period. In 2017 or 2018 dollars to make it real. Logged to normalize somewhat and give a 'change' interpretation
- Growth in growth VC: gg17pcl -- Definitely logged (it's wildly non-normal without and somewhat normal with), even though this gives an change in growth rate interpretation. Could winsorize but logging pretty much deals with outliers anyway. Forward less present over present, so still forward looking.
- We could also conceivably use the change in rank: rankchg (=f.overallrank-overallrank) or rankup (=overallrank-f.overallrank). It would be much 'smoother' than other measures. It's also pretty normal (if a little sharply peaked at 0). However, it would be relative performance measure!
Choose dataset:
- Restrict on numlayers. Those with <3 layers can't form hulls. 3 layers is therefore a minimum for a hull based analysis. 6 layers allows 2 hulls, in theory anyway, and doesn't. 6,746 place-years have 2 or more layers (max is 1317), 4,969 have 6 or more layers.
- Restrict on time period. Data is from 1980 to present, through note that we have our synthetic Houstons which have years from 1 to 65 to indicate how many locations were replaced. We might want to restrict to 1986 to present to get good coverage. Or from 1995 to present to do the 'modern era'. Note that 2019 is a half year, so we should probably through it out.
- We are already restricting to the 198 places that had greater than 10 active at some point in their history...
Choose scale regressors:
- growthinv17l numdealsl numstartupsl
Then the analysis will be loosely as follows:
- Non-layer dependent descriptives
- Explain layers using Burlington, VT?
- Explain outliers using Las Vegas, NV?
- Highest1Hull
- Show Boston? at the elbow for 2018, 2017, 2016
- Elbow
- Layer Dependent descriptives I
- Levels (picking layer by average hull size)
- Maximum R2
- Layer Dependent descriptives II
- Group Means
- Policy Simulation
It would be good to include some MSA level or broader ecosystem level variables. These could include:
- Scale of MSA?
- Boston-Cambridge, Research Triangle, Silicon Valley, North East Corridor, LA, Bay Area, Seattle Area, and other notable indicators.
- Some dbase calculated measures:
- Number of adjacent places in placetigerarea (or similar)? Create a 10km buffer and look for intersections?
- Chain places together and count them?
The Between Estimator just isn't appropriate. We do want fixed effects (we'll test to see if random effects are appropriate - they aren't). See E:\projects\agglomeration\microeconometrics-using-stata.pdf p254 to p262, as well as this www.statalist.org thread.
Also the maximum r2 approach picked a number of hulls, which should have been constant (it is now - there were errors before) within a place, making it redundant. Note that STATA will run the variable if you include the fixed effect second but not first - try:
reg something else i.control reg something i.control else
This problem doesn't occur when using xtreg, which also appears to correctly cluster the standard errors.
Highest1hull
The 'highest1hull' (or 2 or 3) is a specification that identifies the highest level that has 1 hull the first time (i.e., starting from level 1, go until the level has 2 hulls and back it up one, or if it doesn't have 2 hulls, just find the highest layer with 1 hull.
As a consequence we can't use nohull, as it is always 1. It also turns out that tothullcount and tothulldensity don't matter, likely because we already include numstartupsl (removing it makes tothullcount significant). avgdisthm, however, does work.
Levels
We tried the following 'levels' (See Levels.xlsx):
| Name | Tgt. Avg. Hull Size | Act. Avg. Hull Size | Act. Avg. Hull Count | Coef. | Sig | Act. Density |
|---|---|---|---|---|---|---|
| HCLLayerLevel1 | 2 | 1.390169 | 3.31986 | 0.031994 | 0.418743 | |
| HCLLayerLevel2 | 5 | 3.828996 | 4.213987 | -0.00471 | 0.90864 | |
| HCLLayerLevel3 | 10 | 7.921853 | 4.949919 | -0.04308 | 1.600401 | |
| HCLLayerLevel4 | 15 | 12.38832 | 5.483262 | -0.00495 | 2.259297 | |
| HCLLayerLevel5 | 20 | 16.82407 | 5.879045 | 0.057642 | 2.861701 | |
| HCLLayerLevel6 | 25 | 21.07783 | 6.218925 | 0.13614 | * | 3.389304 |
| HCLLayerLevel7 | 30 | 25.40073 | 6.512421 | 0.174672 | ** | 3.900351 |
| HCLLayerLevel8 | 35 | 29.48548 | 6.788268 | 0.155578 | ** | 4.343594 |
| HCLLayerLevel9 | 40 | 33.6133 | 7.02369 | 0.158089 | * | 4.785704 |
| HCLLayerLevel10 | 50 | 41.93593 | 7.452783 | 0.163425 | * | 5.626882 |
| HCLLayerLevel11 | 35000 | 5080.886 | 37.30932 | 0.3621 | 136.1828 |
From this, the optimum density -- the point at which the change in total density gives no further growth effect is probably between 2 and 3 startups per hectare. We will split the difference and use 2.5 startups per hectare as the optimum for the our innovation district simulations. Given than 0.001 decimal degrees is 111.3199m, there are 0.000898 degrees/hm [4]. We'll use square boxes, so our corners will be:
coord +/- ( ( (sqrt(x)/2)*0.000898) / 2.5)
Note that we had one too many decimal places in the earlier version by accident, which is why everything looked really weird!
Elbow
The elbow uses the point of inflection between the fracunclustered and fracinhull in the base table hcllayerwfinal (i.e. across all place, statecode, year, layer). This inflection point is at 0.425704 fracunclustered -- which is layer/finallayer.
2.8485 x^3 - 3.3892 x^2 - 0.43^x + 1.0373≈-0.0553263 at x≈0.425704 (y=0.459799)
Within cities, and with year fixed effects, the only things that matter are the number of singleton/multitons and the number of hulls. The more singletons/multitons, the greater the growth; and the more hulls, the lower the growth. This result goes away if we control for the full set of geographic characteristics. Without city fixed effects, only avgdisthm is significant (and negative).
Maximum R2
The Maximum R-squared analysis relies on finding layers by hull count. Specifically, for a certain hull count, say 2, we find the lowest-highest layer occurrence. That is we first find the last layer (i.e., the highest layer) that had a hull count of 2, then if that occurrence is a part of a sequence, we find the first time that in the sequence.
Possible examples include Portland, OR (in say 2018), or Burlington, VT in 2015
SELECT * FROM HullsBase WHERE place='Burlington' AND statecode='VT' AND year=2015; place statecode year layer numclusters Burlington VT 2015 1 1 Burlington VT 2015 2 1 Burlington VT 2015 3 1 Burlington VT 2015 4 2 Burlington VT 2015 5 2 Burlington VT 2015 6 1
For Burlington, the lowest-highest layers are 4 for hull count 2 and 6 for hull count 1. Note that there is presumably a layer 7 with hull count 0.
We want to regress, within each city, our measures on performance, and then select the lowest-highest layer -- in effect the number of hulls -- which maximizes the R-squared of the regression. We are going to use 1995 to 2018 inclusive, which is 24 years. We want to include scale variables (i.e. 3 vars: growthinv17l numdealsl numstartupsl), and the (almost full -- we can't do avgdisthm) set of explanatory vars (8 vars nosinglemulti nopair nohull totsinglemulticount totpaircount tothullcount tothullarea totpairlength), which would total 11 vars plus an intercept. To reduce this, we can do a PCA first.
The alternative method is to create residuals from the outcome variable (growth vc) after taking out the variation explained by the scale effect. We can then use these residuals as the outcome variable in the city-by-city regressions (again, perhaps with a PCA). The advantage to this method is that we will pick layers based on their R2 of just the agglomeration effect, rather than agglomeration and scale together.
reg growthinv17lf growthinv17l numdealsl numstartupsl i.year i.placeid if lowesthighestflag==1 & year>=1995 & year <. predict growthinv17lfres, residuals
Using the first method, the PCA yields 3 or maybe 4 components. We'll use 4.
Then we need to create a new dataset with placeid year as the panel, so that we can run between regressions. One issue was that some observations have a missing avgdisthm even when layer=chosenhulllayer. This was because in some cases there was only one geometry. In a similar vein, avghulldisthm is the distance between hull geometries, not within hull geometries, so is missing when there are zero or one hulls. In both cases, we flag the instances (using variables onegeom, onehull, zerohull) and then replace missings with zero (as this is conceptually correct).
Instrumental Variable(s)
See https://en.wikipedia.org/wiki/Instrumental_variables_estimation for background.
We want a variable that affects the amount of venture capital only through its effect on agglomeration. More specifically, in the case of the highest1hull, we want a variable that affects the next periods VC only through its effect on the hull size (given that there is always one and only one hull). Moreover, we will be using city-level fixed effects, so a variable that doesn't change over time -- like the size of the city -- will have no variation to drive an effect on hull size. There are two immediate possibilities, using a size measure involving the TIFs or using the number of locations within TIFs. The points measure has two opposing effects in it: it grows as more startups move into TIFs and it grows as TIFs take up more area. The size measure(s) could be the area of TIfs intersecting last periods hull and the area not intersecting it.
hull area in t = f( hull area in t-1 intersecting TIF areas in t, TIF areas in t not intersecting hull area in t-1).
The two measures will have temporal variation as TIF areas vary over time and as hull areas vary over time...
Instrumenting highest1hull
The instrument on highest1hull needs to work in itself, but we also need a consistent estimate of an effect for the population and for the 13 (or 10, etc.) cities that we can instrument before we start.
It looks like including year fixed effects in the 'standard' highest1hull spec is just too much with the reduced sample size. We can use a boom indicators though:
reg growthinv17lf growthinv17l numdealsl numstartupsl avghullarea boom i.placeid if reg1==1 & year95==1, robust reg growthinv17lf growthinv17l numdealsl numstartupsl avghullarea boom i.placeid if reg1==1 & year95==1 & tifs==1, robust reg avghullarea tifintareahm boom i.placeid if reg1==1 & year95==1 & tifs==1, robust tab placeid if tifs==1, gen(tifcity) ivreg2 growthinv17lf growthinv17l numdealsl numstartupsl boom tifcity* (avghullarea=avghullarea_L) if reg1==1 & year95==1 & tifs==1, robust endog(avghullarea)
Useful documentation:
- https://economics.mit.edu/files/18 -- Nice section on understanding coefficients, LATE, etc.
- https://www.nuffield.ox.ac.uk/media/3154/stata-intro-part-iii.pdf -- Using ivreg2 and doing it manually with predict
- http://www.repec.org/bocode/i/ivreg2.html - man page for ivreg2
- http://fmwww.bc.edu/EC-C/F2012/228/EC228.f2012.nn15.pdf -- Useful material on additional tests (endog, etc.)
- https://www.stata.com/statalist/archive/2011-04/msg00877.html -- For the stata tests
- https://journals.sagepub.com/doi/pdf/10.1177/1536867X0800700402 -- Actual documentation!
And later additions:
- http://www.columbia.edu/~ajc2241/Instrumental%20Variables%20Estimation%20in%20Political%20Science.pdf
- Interpreting Instrumental Variables Estimates of the Returns to Schooling: http://www.nber.org/~kling/kling_iv.pdf
- http://cameron.econ.ucdavis.edu/e240a/ch04iv.pdf
- Just How Sensitive are Instrumental Variable Estimates? https://web.stanford.edu/~preiss/iv_sensitive.pdf
- LATE: http://econometricsense.blogspot.com/2017/07/instrumental-variables-and-late.html
- Explanations of IVs: http://econometricsense.blogspot.com/2015/11/instrumental-explanations-of.html
Results are as follows:
- In the first stage, the instrument is highly (positively statistically significant).
- Without the instrument my estimate is small, negative and sig at 5%.
- With the instrument, the estimate is small, positive and insig.
- Underidentification test is significant, H0 is that model IS underidentified, so this is rejected p486
- Weak ID test has a Cragg-Donald Wald F statistic of 58.713, which is well above the critical bounds
- Overidentification test is 0 (null is identified), and it says "equation exactly identified"
- Endogeneity test is 3.375 with Chi-sq(1) P-val = 0.0662. Null is that it is exogeneous, which is rejected.
. ivreg2 growthinv17lf growthinv17l numdealsl numstartupsl boom tifcity* (avghullarea = tifintareahm) if reg1==1 & year95==
> 1 & tifs==1, robust endog(avghullarea)
Warning - collinearities detected
Vars dropped: tifcity12
IV (2SLS) estimation
--------------------
Estimates efficient for homoskedasticity only
Statistics robust to heteroskedasticity
Number of obs = 179
F( 16, 162) = 14.82
Prob > F = 0.0000
Total (centered) SS = 412.5880393 Centered R2 = 0.5846
Total (uncentered) SS = 3128.446788 Uncentered R2 = 0.9452
Residual SS = 171.3895217 Root MSE = .9785
------------------------------------------------------------------------------
| Robust
growthin~7lf | Coef. Std. Err. z P>|z| [95% Conf. Interval]
-------------+----------------------------------------------------------------
avghullarea | 7.13e-06 8.44e-06 0.84 0.399 -9.42e-06 .0000237
growthinv17l | .2036359 .1261974 1.61 0.107 -.0437064 .4509783
numdealsl | -.0775574 .1797158 -0.43 0.666 -.4297939 .2746791
numstartupsl | .8311169 .2834661 2.93 0.003 .2755335 1.3867
boom | 1.063169 .2712561 3.92 0.000 .531517 1.594821
tifcity1 | .3257855 .401005 0.81 0.417 -.4601698 1.111741
tifcity2 | .055352 .6979564 0.08 0.937 -1.312617 1.423321
tifcity3 | -.6024319 .7152221 -0.84 0.400 -2.004241 .7993776
tifcity4 | .3234907 .4568871 0.71 0.479 -.5719915 1.218973
tifcity5 | -.2383231 .4824386 -0.49 0.621 -1.183885 .7072392
tifcity6 | -.2941022 .398834 -0.74 0.461 -1.075802 .4875981
tifcity7 | -.8108876 1.113175 -0.73 0.466 -2.992671 1.370896
tifcity8 | .2262667 .5042398 0.45 0.654 -.7620251 1.214558
tifcity9 | -.0979371 .4359115 -0.22 0.822 -.9523079 .7564337
tifcity10 | -1.042832 .6154755 -1.69 0.090 -2.249142 .1634775
tifcity11 | -.3423386 .4180955 -0.82 0.413 -1.161791 .4771135
tifcity12 | 0 (omitted)
_cons | -.0235353 .9222309 -0.03 0.980 -1.831075 1.784004
------------------------------------------------------------------------------
Underidentification test (Kleibergen-Paap rk LM statistic): 17.585
Chi-sq(1) P-val = 0.0000
------------------------------------------------------------------------------
Weak identification test (Cragg-Donald Wald F statistic): 58.713
(Kleibergen-Paap rk Wald F statistic): 15.579
Stock-Yogo weak ID test critical values: 10% maximal IV size 16.38
15% maximal IV size 8.96
20% maximal IV size 6.66
25% maximal IV size 5.53
Source: Stock-Yogo (2005). Reproduced by permission.
NB: Critical values are for Cragg-Donald F statistic and i.i.d. errors.
------------------------------------------------------------------------------
Hansen J statistic (overidentification test of all instruments): 0.000
(equation exactly identified)
-endog- option:
Endogeneity test of endogenous regressors: 3.375
Chi-sq(1) P-val = 0.0662
Regressors tested: avghullarea
------------------------------------------------------------------------------
Instrumented: avghullarea
Included instruments: growthinv17l numdealsl numstartupsl boom tifcity1
tifcity2 tifcity3 tifcity4 tifcity5 tifcity6 tifcity7
tifcity8 tifcity9 tifcity10 tifcity11
Excluded instruments: tifintareahm
Dropped collinear: tifcity12
------------------------------------------------------------------------------
Note that using lagged avghullarea as an instrument seems to work... Results are as follows:
- With the instrument, the estimate is close to the original, still negative and sig at the 5% level.
- Underidentification test is significant, H0 is that model IS underidentified, so this is rejected
- Weak ID test has a Cragg-Donald Wald F statistic of 679.195, which is massively above the critical bounds
- Overidentification test is 0 (null is identified), and it says "equation exactly identified"
- Endogeneity test is 0.037 with Chi-sq(1) P-val = 0.8465. Null is that it is exogeneous, which we can't reject.
Overall, though, it looks like the TIF instrument is dead. Which is a HUGE shame.
Results
It looks like a previous version of this results section wasn't saved somehow...
The crucial information is the magnitude of effect of coefficients:
- Log-level: (e^B -1)*100, gives pc change in Y from 1 unit change in X [5]
- Except with indicator variables, when the positive change is (e^B -1)*100 but the negative change is (e^(-B) -1)*100 [6].
- Log-log: ((1.01^B)-1)*100 [7]
Note that some guides appear to contain errors [8]!
We are working off of the besthulllayer regression coefficient between:
. xtreg growthinv17lf numdealsl numstartupsl nohull frachull tothullareal avgdisthml onegeom i.year if reg6==1, be
Between regression (regression on group means) Number of obs = 3,635
Group variable: placeid Number of groups = 198
R-sq: Obs per group:
within = 0.0000 min = 2
between = 0.9010 avg = 18.4
overall = 0.0189 max = 23
F(29,168) = 52.73
sd(u_i + avg(e_i.))= .4628413 Prob > F = 0.0000
------------------------------------------------------------------------------
growthin~7lf | Coef. Std. Err. t P>|t| [95% Conf. Interval]
-------------+----------------------------------------------------------------
numdealsl | -.7000722 .2198263 -3.18 0.002 -1.13405 -.2660944
numstartupsl | 2.125103 .2104279 10.10 0.000 1.709679 2.540527
nohull | -.0154989 .0094233 -1.64 0.102 -.0341023 .0031045
frachull | .2890439 .2398689 1.21 0.230 -.1845017 .7625894
tothullareal | -.0726595 .0423528 -1.72 0.088 -.1562717 .0109526
avgdisthml | -.2554753 .0868682 -2.94 0.004 -.4269693 -.0839814
onegeom | -1.217626 .4010889 -3.04 0.003 -2.009449 -.4258019
|
year |
...
2017 | 11.83234 3.830136 3.09 0.002 4.270947 19.39374
|
_cons | -3.687907 3.026614 -1.22 0.225 -9.663005 2.28719
------------------------------------------------------------------------------
| 1 unit change gives pc change in Y | 1 pc change gives pc change in Y | |
|---|---|---|
| numdealsl | -0.69417 | |
| numstartupsl | 2.137063 | |
| nohull | -1.537941017 | |
| frachull | 33.51503403 | |
| tothullareal | -0.07227 | |
| avgdisthml | -0.25388 | |
| onegeom | -70.40681241 |
CoLevelForCircles
Note: Make sure that the geocoding has been fixed first! See Restoring_vcdb3#Fix_the_Geocoding. Note that we are working with decimal degrees to six decimal places from Google Maps, which is equivalent to a staggering 11cm of accuracy at the equator. See http://wiki.gis.com/wiki/index.php/Decimal_degrees.
The build is as follows:
- portcomaster 48001 (where hadgrowth=1 34761) and portcogeo (47715 where latitude and longitude NOT NULL 47715) -> colevelsimple 33869
- colevelsimple 33869-> CoPoints (adds point geoms)
- tigerplaces 29322 (has place geoms) -> tiger2 (adds areas)
- tiger2,CoPoints ST_Intersects -> colevelbase 29442
- colevelbase,years -> colevelblowout 219060, CoLevelSummary 35344, PlacesWithGT10Active 200
- colevelblowout,PlacesWithGT10Active -> CoLevelForCircles 171170
HCA
Take CoLevelForCircles.txt and feed it into the HCA script in
E:\projects\hca\main.py
See also:
Take results.tsv and load it as the HCL table.
Layers and levels
See Agglomeration.sql for the following build:
- hcl loaded from results.tsv 29751998
- Determine if singleset, multiset or hullset (fully partitions data)
- Make hclsingletons, hclmultitons and hclhulls (which contains both hulls and lines)
- UNION them together to create hclmain (14875999), which contains geographies
- Make hcllayer 163887: Aggregate to the layer level calculating nosingleton, nomultiton, etc., as well as tothullarea etc.
Note that everything uses Geographies (except to find centroids), and pair lengths and hull areas are scaled so that they are in hm and hectares (hm2) [9], as this is close to being a city block length and square block [10] at least in Houston, TX (note that a block in Chicago is 2 Houston blocks and there is no standard block definition).
Then load up leveldefinitions.txt. Note that we are using more levels than before, with finer grained levels at the bottom end:
Level Label Target 1 100msq 0.01 2 1blfront 0.1 3 1blsq 1 4 5blsq 5 5 10blsq 10 6 25blsq 25 7 50sqbl 50 8 1kmsq 100 9 5kmsq 400 10 10kmsq 1000 11 20min rule 35000
Then build the nohulls as level 0 and the allhull as level 12. Note that we are going to have to throw out panels or observations with too few points per city-year later, as these can have singletons, multitons, or pairs as their allhulls. This can be done with nohull !=0. Also nohulls can be built using hcllayer then it will contain pairs, or from colevelforcircles. I opted for the later, so that it only contains singletons and multitons.
Finally in this part, build hcllevels and hcllayerwzero. For hcllevels we are going to compute mean distances between clusters. It is computational infeasible to do this for all layers. And then for all layers (inc zero) we are going to run our selection regression.
For the next steps on the data see Jeemin Sim (Work Log). This includes details of how to load the TIF data.
Approach
We want to choose some layers to work with. https://en.wikipedia.org/wiki/Hierarchical_clustering notes that "One can always decide to stop clustering when there is a sufficiently small number of clusters (number criterion). Some linkages may also guarantee that agglomeration occurs at a greater distance between clusters than the previous agglomeration, and then one can stop clustering when the clusters are too far apart to be merged (distance criterion)."
In a similar vein, https://en.wikipedia.org/wiki/Determining_the_number_of_clusters_in_a_data_set describes the elbow method, using AIC/BIC, etc., as well as an Information theoretic approach, the silhoette method, etc.
For us:
- Discarding outliers
- Elbow on fraction of locations in hulls
- Chosen by the researcher
- Maximum R-Squared
We also looked at:
- Elbow on fraction of maximum hull area in hulls
And finally, we need to think about:
- Reasonable exclusions
Discarding Outliers
We don't need to discard outliers, per se, just find a layer where outliers are singletons. A wrong approach is to take the highest layer with a single hull (or two hulls or three hulls, etc.). It is fair that if a layer never has a hull, then presumably it only has a single location or a line of locations (note that it is possible for a line to have more than 2 locations both because of multitons and because of perfect alignment, given our Google Maps accuracy), so we can discard it. However, this approach will find when there is just one hull left, rather than the last time that there is one hull in decomposition.
Possible options and issues:
- Find when there are first two hulls and then step back a layer -- but there might never be two hulls, so if there is only ever one hull then find the max layer.
- Form a chain from layer 1 on down that breaks when there is no longer just one hull. Perhaps count the number links, grouping where the chain has one hull or not, or require that the chain contain level 1... [11]
We went with the first option. The base table for this approach is hcllayer. The variables are highest1hulllayer, highest2hulllayer, and highest3hulllayer in the highesthulllayer table.
It is worth noting that the highest1hulllayer occurs on average at around 35.9% unclustered (with std dev. of 48.0%), but this falls to just 12.8% when we exclude years where the highest1hulllayer is also the last and hence only layer. These percentages go down slightly for highest2hulllayer and highest3hulllayer because cities that have 2 or 3 (or more) hulls have larger ecosystems and so more layers.
Elbow on fraction of locations in hulls
The elbowcalc and elbowdata queries provide the data. elbowdata takes layer/finallayer (i.e., fraction unclustered, as the layer 1 is the all encompassing hull and final layer is the raw locations), rounds it to two digits, and then calculates the average fraction of locations in hulls and the average hull area fraction of all encompassing hull area. The former gives a nice curve with an elbow (found by taking the second derivative and setting it equal to zero) at x=0.40237.
We then identify the layer that is closest to having a fraction of locations in hulls of 0.40237, taking the lower level (i.e., the more clustered level) whenever there is a tie. The resulting indicator variable is called elbowflhlayer and is made in table Elbowflh. This is analyzed in a sheet in "Images Review.xlsx" in E:\projects\agglomeration.
Fraction of Maximum Hull Area in Hulls
We also tried computing the fraction of the maximum hull area (MHA) in covered by hulls for each layer. The maximum hull area is on layer one, when every location is in an all-encompassing hull. We excluded data from layer one as well the final layer because they lead small data issues.
A cubic was a mediocre fit to this data, giving an R2 of 83% but with lots of deviation concentrated right around the local minimum ({-0.0224722, {x -> 0.446655}} [12], point of inflection and local maximum. A quartic had an R2 of 90% at around x=0.44 (6.408 x^4 - 15.176 x^3 + 12.592 x^2 - 4.3046 x + 0.517≈0.00825284 at x≈0.440275). I tried a quintic and it had inflection points are x=0.33, 0.55, and 0.82, as well as local maxima at 0.39 and 0.90. Visually there seems to be something going on in the 20% to 40% uncovered range too, perhaps a bifurcation of results, which might be due to rounding issues.
Reasonable Exclusions
We started by including all U.S. cities that received at least $10m of growth venture capital in a year between 1980 and 2017 (inclusive). This gave us a list of 200 cities. However, we still have a lot of city-years with low number of startups.
What is a reasonable number of startups to analyze agglomeration? Three locations (which is at least three startups) is the bare minimum required for one hull without excluding outliers. And we only made images for places with 4 or more startups. A visual inspection suggests that while there is greater (relative) dispersion when counts are low, it isn't hugely problematic. It is also worth noting that excluding 4 or less would get rid of Farmer's Branch, Fort Lauderdale, and Tempe (and Bloomington, MN) in 2017, and 6 or less in 2017 would eliminate Cary and Addison, all of which are slightly problematic. Burlington, VT has 7 years in the data with more than 6 startups, and one with 6.
But everywhere (i.e., all 200 places) have 10 or more layers at some point in time. And everywhere has at least 6 years with 6 or more observations. Detroit has just 7 obs that meet this criteria, half the number of Germantown, MD and a third of Greenwood Village, CO.! Requiring a year to have six observations would reduce us to 4916 observations from 6702 (i.e., down to 73% of the data). Requiring 9 would reduce the data down to 3889 obs (58%), and we'd lose more observations as places wouldn't have enough to form a time-series. The answer then appears to be to limit to observations with 6 or more layers. We'll code the number of layers, and the max and min number of layers for a place, into the data.
Maximum R-squared
Using a maximum R-squared approach to find the 'best layer' for a city is inherently problematic. A city might have 5 layers in 1980 and 80 layers in 2017, and so using layer 40, say, irrespective of year is somewhat meaningless. There are several alternative that make more sense. One is to use the fraction unclustered, much like with the elbow approach. The other is to find the layer with a certain hull count (or as close to it as possible). Hulls might tend to be somewhat stable over time, so three hulls in Portland in 2017 will be centered in more or less the same place as three hulls in Portland in 2003. This turns out to be somewhat true, as seen in the image on the right, which uses the last time (highest level) that there are three hulls, or two for 1998 and 1993 (one of which is out of frame). One issue with this approach is that the highest level with a certain hull count is that hulls almost always contain just three points.
An obvious alternative approach is to use the first time (lowest level) that there are three hulls. There is a big difference in the layer numbers for this. See the queries below. Essentially, the HCA algorithm often takes an original hull apart and then takes the resulting hulls apart, giving a quadratic for hull count again layer. But, as is apparent in the image, this leads to big areas that would only be good for overlap analysis and not for identifying individual clusters.
--Lowest,highest, and lowest-highest, and first-after-peak level where there are three hulls SELECT * FROM DisplayHullsFull WHERE place='Portland' and statecode='OR' AND year='2015' ORDER BY year,layer; --3, 41, 37, 33 (peak at 22,23,24,25) SELECT * FROM DisplayHullsFull WHERE place='Portland' and statecode='OR' AND year='2010' ORDER BY year,layer; --3, 24, 24, 24 (peak at 18) SELECT * FROM DisplayHullsFull WHERE place='Portland' and statecode='OR' AND year='2005' ORDER BY year,layer; --7, 23, 21, 21(peak at 18) SELECT * FROM DisplayHullsFull WHERE place='Portland' and statecode='OR' AND year='2000' ORDER BY year,layer; --3, 17, 17 , 17 (peak at 12,13,14) SELECT * FROM DisplayHullsFull WHERE place='Portland' and statecode='OR' AND year='1995' ORDER BY year,layer; --1(1), 8(1), 8(1), 8(1) (no peak-just flat but still take the highest layer with the nearest lower number of hulls) SELECT * FROM DisplayHullsFull WHERE place='Portland' and statecode='OR' AND year='1990' ORDER BY year,layer; --2(2), 5(2), 5(2), 5(2) (peak at 2,3,4,5 so 5 is first 'after' peak? but still take the highest layer with the nearest lower number of hulls) SELECT * FROM DisplayHullsFull WHERE place='Portland' and statecode='OR' AND year='1985' ORDER BY year,layer; --1(1), 1(1), 1(1), 1(1) (peak at 1 as that's the only layer with a hull but still take the highest layer with the nearest lower number of hulls)
Two further options are to find the lowest-highest and the first-after-peak. These often coincide. The lowest-highest finds the highest layer with x hulls and then works back down the layers taking the lowest in the continuous chain of x hulled layers. The first-after-peak finds the first layer with x hulls in or after the layers where there is the peak number of hulls. This last approach is a little problematic because sometimes there isn't a peak - its just flat - and it is inconceivable that there could be two or more peaks.
Computing the Lowest-Highest, running a PCA (see below) and using three factors in a regression to store R2, N, and adjusted R2, gives the results in the R2 On Hulls sheet of Images Review.xlsx. The first 20 placeIDs were checked (i.e., 10% of the sample). In most cases (16/20), the maximum R2 and R2-Adjusted coincided when considering only cases when N>=10. Note that R2=1 and R2 adjusted is missing for all cases where N <=4, and there there is very high volatility in both measures for N<10.
There were some draws out of scope (i.e., with N=9), and we should take the lowest(?) layer in the event of a draw (they will have the same N with prob ~1). There are some cases to look at:
- 10 - Austin (3885 layers): Came up 3 when it could have been anything up to 23 (with N>=10). Looking at a map, this might be ok. Austin's has some fairly homogenous big clusters in 2017.
- 9 - Atlanta (1414 layers) came up 8/8(N>=10) on R2 and 1 on adjusted R2, which was the biggest spread. All other discrepancies were of a single layer. It is hard to see either answer in the 2017 image, which looks like it has 2 clusters, or maybe 3 or 4. The r2 does jump at level 8 (to 0.50 from 0.28 in the layer before, with the previous highest being 0.39 at level 1), but level 8 has N=13 and is the second highest R2adj at 0.327 as compared with 0.332 in level 1.
- 13 - Bellevue (1181 layers) had R2 and R2adj in agreement at level 2, but there were 7 levels with N>=10 and 13 levels over all. 2 looks ok on the map in 2017 (3 or 4 would likely be better). I expect that this is a case of a place that had dramatic growth...
- 6 - Alpharetta (580 layers) comes it at 1 for both R2 and R2adj even with N<10 but has 6 layers, 4 of which have N>=10. It looks like a pretty homogeneous place in Georgia.
We also need to check some of the really big places:
- San Fran (160 - 12,946) is 52 on both (N=12, >=10). Picking any N>=10 up to N=15 will always find the largest hull count. At N=16 it finds the smallest large hull count (41 to 47 are all N=16).
- Boston (22 - 3,506) is 17 with N=10 and 11 (N=17) with N>10 on both measures.
- New York (122 - 11,466) is 27 with both measures with N>10 (N=18). It is 67 and then 66 at N=10 on both! N=12's 65 hulls is in fourth place.
- Palo Alto (134 - 3,492) is 1 with both measures. Even allowing N<10 there isn't an issue until N=5.
The analysis was repeated but using only 1995 to 2017 inclusive (i.e., the modern era). The results were much more stable for N>=10. 20 out of 20 maximum R2 hull counts were also maximum adjusted R2 counts. N>=10 also seemed much less contentious, though N=11 (just under 50%) would have given the same result and N>=12 would have change only one result. Austin now maximized at 11 hulls - which is pretty much in the middle of its set. Boston was the same as before: 17 hulls with N=10 and 11 hulls with N>=11. Given the shape using N=11 or 12 might be preferred. New York now follows a similar pattern to Boston, and is 67 hulls with N>=10 and 27 hulls with N>=11. Again, the higher N result seems preferred. Palo Alto is now 18 hulls (out of 33 with 19 N>=10), which is a shame but hey. SF maxes out at 52 hulls, with N=12.
So, aside from the Palo Alto result, this is clearly a greatly preferred spec. I think N>=12 (just over half of the 23 years) is fair as a cut off. Also Portland, OR, maximizes at 4 hulls on both measures with N=15...
The only thing that we should change is the R2 estimation regression. Up until this point, we've been using:
pca nosinglemulti nopair nohull totsinglemulticount totpaircount tothullcount totpairlength tothullarea predict pc1 pc2 pc3, score quietly capture reg growthinv17lf pc1 pc2 pc3 if placeid==`placeid' & numclusters==`clusters' & lowesthighestflag==1 & year>=1995 & year <.
Issues and Solution
There are two issues. Why are we using a PCA? Just to get the number of regressors down? The dimensionality isn't that high. And more importantly, one or more PCA components may be picking up a scale effect. We don't want to use the scale regressors in R2 estimation, because they might drive the R2.
So the solution is to first regress to estimate the scale effect and then create residuals:
reg growthinv17lf growthinv17l numdealsl numstartupsl i.year i.placeid if lowesthighestflag==1 & year>=1995 & year <. predict growthinv17lfres, residuals
We then can't use nohull in the regress so our variable list is as follows:
quietly capture reg growthinv17lfres nosinglemulti nopair totsinglemulticount totpaircount tothullcount totpairlength tothullarea if placeid==`placeid' & numclusters==`clusters' & lowesthighestflag==1 & year>=1995 & year <.
Again using a cut off of 12, there's some slight divergence between the R2 and adjusted R2 maximization points, but not much (2 out of 20). The results looks pretty much like before for the first 20 with some minor differences. 12 out of 20 places have the same answer. The 7 of the 8 remaining are different by just a hull or two. Only Austin is different, with now 21 hulls rather than 11. The R2 adjusted for Austin maximizes at 7.
Checking the other cities leads to the following observations:
- Portland is still maximized at 4 hulls
- Boston maximizes at 16 hulls on R2 and 5 on R2 adjusted. Recall that it was at 11 with N>=11.
- New York now maximizes at just 17 hulls, which is a massive drop. But it does look like a clean interior solution.
- Palo Alto is down at 12 hulls.
- SF is at 21 hulls, way down from its old value in the 50s.
- The large set results look more interior and stable than before... the cutoff of 12 looks reasonable too.
Revisiting Portland
Portland doesn't have 4 clusters for any year before 2000, or for 2007 and 2009. For 5 year multiples the layers are as follows:
2000 15 2005 19 2010 19 2015 33
The resulting map has much more adjacency than overlap. Measuring the nearest hull edge and center distance for each hull in a year to each hull in the next year and averaging would compute two measures of hull persistence. The overlap area from year to year, either in total or as a fraction of the second year's (or smaller years) total area, would provide another measure of persistence.
What do we want to know?
So now we have 200 (ish) cities with their optimally selected hulls (we chose the best hull count that is constant from 1995 to 2017 using the lowest-highest occurrence of that count). And now we'd like to know:
- Whether having fewer hulls is associated with growth, controlling for size -- it is: nohulll -.168335***
- Whether having a greater hull density is associated with growth, controlling for size -- it is: tothulldensityl .0730263***
- Whether having a higher fraction of locations inside hulls is associated with growth, controlling for size: -- it isn't: frachull -.1345406*
- Whether having hulls closer together is associated with growth, controlling for size. We should put these layer in the list to build avghulldisthm and avgdisthm (see line 1335).
Houston, TX
We also want to know about Houston, TX.
tab place placeid if placeid >50 & placeid <100 //Houston is 83 tab chosenhullspcar2inc if placeid==83 //10
SELECT year, layer FROM MasterLayers WHERE place='Houston' AND statecode='TX' AND layer=lowesthighestlayer AND numclusters=10 ORDER BY year, layer; 1990 20 2000 45 2005 50 2010 30 print myDict["Houston_TX"]; [-95.836717, -95.014608, 29.515925, 30.155908]
Useful place data:
- The Sears Building is at 29.8055662,-95.7145812 [13]
- The four corners of the innovation corridor are [14]:
- 100 Hogan St Houston, TX 77009 29.774004, -95.367127
- Second Ward Houston, TX 29.759421, -95.346044
- Orange Lot Houston, TX 77054 29.682241,
- Buffalo Speedway Houston, TX 77025 29.695301, -95.426753
The policy evaluation methodology:
- Find the optimal number of hulls. Choose the corresponding layer for 2017, or the closest layer to it. Call this the Houston2017 layer.
- Run a regression across cities to estimate the effect of the number of hulls, total hull area, avg hull distance, fraction in hulls, and perhaps other measures, as well as the scale measures, to generate coefficients.
- Plug in Houston2017's values.
- Create an artificial Houston2017X layer that moves 1/x (x=4, for example) of all of Houston's startups into a single 25hmsq innovation district. Evaluate it!
- Create an artificial Houston2017Y layer that moves 1/x of all of Houston's startups into the proposed innovation corridor. Evaluate it!
- Also calculate the expected values for a city with Houston's characteristics (?) and plug those in.
Working off this regression:
xtreg growthinv17lf nohull nohullsq frachull frachullsq tothullarea tothullareasq avghulldisthm avghulldisthmsq, be
---------------------------------------------------------------------------------
growthinv17lf | Coef. Std. Err. t P>|t| [95% Conf. Interval]
----------------+----------------------------------------------------------------
nohull | .3839447 .0563233 6.82 0.000 .2727974 .495092
nohullsq | -.0098748 .0024791 -3.98 0.000 -.014767 -.0049826
frachull | -1.695035 2.044876 -0.83 0.408 -5.730354 2.340284
frachullsq | -.6243502 1.534811 -0.41 0.685 -3.653117 2.404416
tothullarea | -.0007168 .0003133 -2.29 0.023 -.001335 -.0000985
tothullareasq | 1.44e-07 5.52e-08 2.60 0.010 3.48e-08 2.53e-07
avghulldisthm | .0157895 .0068875 2.29 0.023 .0021978 .0293813
avghulldisthmsq | -.0001506 .0000556 -2.71 0.007 -.0002602 -.0000409
_cons | 3.629909 .5882279 6.17 0.000 2.469112 4.790707
---------------------------------------------------------------------------------
In 2017, Houston had the following characteristics:
year layer growthinv17 growthinv17l nohull nohullsq frachull frachullsq tothullarea tothullareasq avghulldisthm avghulldisthmsq 2017 20 76.533 4.350703652 7 49 0.595744681 0.354911725 268.2674944 71967.44853 100.6191636 10124.21608 1 0.3839447 -0.0098748 -1.695035 -0.6243502 -0.0007168 1.44E-07 0.0157895 -0.0001506 3.629909 2.6876129 -0.4838652 -1.009808085 -0.221589206 -0.19229414 0.010363313 1.588726284 -1.524706942 3.629909 4.484347923 88.61914544
We are going to do the following:
- Calculate a base effect using the real data, much as above.
- Define some target areas - the innovation corridor and a new innovation district. The innovation districts location will have to be picked based on the data and its size determined by the optimal hull area (or using the 25hmsq suggested by the economists).
- Take the 2017 Houston data (providing we don't need f.growthinv or can come up with it seperately), reallocate a randomly selected 25% of startups to a random location in the target area and recompute the hulls and layers using the HCA script.
- Compute the effect on growth and do a back-of-the-envelope calculation for whether it is worth TIF financing.
Note that 0.001 decimal degrees is 111m or 1.11hm [15], so 2.5 hm (for a total of 5 per side, and so 25hmsq) is 0.002252 decimal degrees and 1.617hm (giving a hull area of 10hmsq, which at 0.95 startups per hectare -- essentially 1 per square block, accommodates 25% of Houston's 47 active startups in 2017 in 10.46025 hectares). Using centroid analysis on Houston's 2017 hulls, the optimal location for a 3.2 block by 3.2 block innovation district is just above the Galleria area in Uptown [16]. There is a business park directly adjacent to these coordinates which ia about the right size for the innovation district and currently includes the offices of Schlumberger, Alert Logic, Hire Priority, and others.
Supposing that all of Houston's 43 active startups were relocated, it doesn't much matter where you put them. One questions is whether the 4 sq mile innovation corridor would then be an improvement over the status quo, and how much worse it would be than a district that of the implied optimum density? Such a district, using 0.95 hectares per location, would have an implied hull area of around 45 hectares, or a 0.003011 decimal degrees deviation in four directions from a point (to give 4 corners of a square).
Group Means Regression
Once we have found optimum hull specifications within a city, they will not vary, or will vary very little, over time. We therefore want to use a between panel regression, also called a group means regression. See the following:
- The spec on p34 of http://people.stern.nyu.edu/wgreene/Lugano2013/Greene-Chapter-11.pdf
- The explanation at the top of https://stats.stackexchange.com/questions/83462/the-between-estimator-in-panel-data
- https://www.stata.com/support/faqs/statistics/between-estimator/
- The definition in https://www.stata.com/manuals13/xtxtreg.pdf
Image Analysis
Building Images
Use B&W:
- 50% grey at 75% transparent for city outline
- 50% grey at 50% transparent for hull
- Black + for singleton (size 10pt), 50% transparent when in pair or hull
- Black * for multiton (size 10pt), 50% transparent when in pair or hull
- Black line for pair
Informs colors:
- Orange: R240 G118 B34
- Blue: R31 G61 B124
- Green: R129 G190 B65
Town: Blue, 75% tranparent
Working with ArcPy
First version saved as E:\projects\agglomeration\Test.mxd
If the basemaps aren't available, connect to ERSI online using the icon in the system tray[17]
Basic set up is:
- displayhulls layer=1 grey50%,trans50%,noborder
- displaymultitons asterisk4,black,size10,trans50%
- displaysingletons cross1,black,size10,trans50%
- placetigerarea grey50%,trans75%,grey80%border
- Reference
- Basemap - World Light Grey Canvas
Change dataframe map to GCS 1984 and display to decimal degrees Saved as: FullHullReview2017.mxd
Open python window then:
#Load the map and create the dataframe
mxd = arcpy.mapping.MapDocument(r"E:\projects\agglomeration\FullHullReview2017Colored.mxd")
df = arcpy.mapping.ListDataFrames(mxd)[0]
df.credits="(c) Ed Egan, 2019"
#Now do the image generation!
myDict = {}
#myDict["Burlington_VT"] = [-73.27691399999999,-73.176383,44.445927999999995,44.539927]
#... See the entries in E:\projects\agglomeration\arcpydict.txt
for location in myDict:
newExtent = df.extent
newExtent.XMin = myDict[location][0]
newExtent.XMax = myDict[location][1]
newExtent.YMin = myDict[location][2]
newExtent.YMax = myDict[location][3]
df.extent = newExtent
df.panToExtent(df.extent)
filename="E:\\projects\\agglomeration\\Images\\"+location +".png"
arcpy.mapping.ExportToPNG(mxd, filename, resolution=144)
#arcpy.RefreshActiveView()
#mxd.save()
If you run into issues, it's useful to test things step by step:
#Test some exports, note that if the geocords are in a different system from the extent parameters, you'll be exporting blank images! arcpy.mapping.ExportToPNG(mxd, r"E:\projects\agglomeration\Images\BurlingtonAuto1.png", resolution=144) print df.extent #-73.5977988105381 44.1185146554607 -72.8022011894619 44.680787974202 NaN NaN NaN NaN #Test with Burlington, VT newExtent = df.extent newExtent.XMin =-73.219086 newExtent.XMax =-73.19356 newExtent.YMin = 44.460346 newExtent.YMax = 44.48325 df.extent = newExtent arcpy.mapping.ExportToPNG(mxd, r"E:\projects\agglomeration\Images\BurlingtonAuto2.png", resolution=144) df.panToExtent(df.extent) arcpy.mapping.ExportToPNG(mxd, r"E:\projects\agglomeration\Images\BurlingtonAuto3.png", resolution=144) #Test with Buffalo, NY (while looking at Burlington, VT) newExtent = df.extent newExtent.XMin =-78.95687699999999 newExtent.XMax =-78.795157 newExtent.YMin =42.826023 newExtent.YMax =42.966454999999996 df.extent = newExtent arcpy.mapping.ExportToPNG(mxd, r"E:\projects\agglomeration\Images\BuffaloAuto1.png", resolution=144) df.panToExtent(df.extent) arcpy.mapping.ExportToPNG(mxd, r"E:\projects\agglomeration\Images\BuffaloAuto2.png", resolution=144)
Remove basemap credits[18]:
- Click on World map layer
- Insert->Dynamic Text->Service Level Credits
- Set the symbol color to no color
Help pages:
- ArcPy Functions: https://desktop.arcgis.com/en/arcmap/10.3/analyze/arcpy-functions/alphabetical-list-of-arcpy-functions.htm
- Export to PNG: http://desktop.arcgis.com/en/arcmap/10.3/analyze/arcpy-mapping/exporttopng.htm
- Data Frames: http://desktop.arcgis.com/en/arcmap/10.3/analyze/arcpy-mapping/dataframe-class.htm
- Map Documents: http://desktop.arcgis.com/en/arcmap/10.3/analyze/arcpy-mapping/mapdocument-class.htm
- Text Elements: http://desktop.arcgis.com/en/arcmap/10.3/analyze/arcpy-mapping/textelement-class.htm
- Data access module: http://desktop.arcgis.com/en/arcmap/10.3/analyze/arcpy-data-access/what-is-the-data-access-module-.htm
Analyzing the results
The following issues became apparent (Counts out of 191 cities with 4 or more locations in 2017 and greater than $10m inv in a year over all time):
- Encapsulation - A small number of place boundaries are fully encapsulated inside of other geoplaces. We need to determine when this happens. The initial list includes Addison, Culver City, Santa Monica (might be extreme adjacency), and others. We need a query to work this out.
- Concavity (6 marked) - Some place boundaries are fairly extremely concave (for instance, Fort Lauderdale, FL, Birmingham, AL, Boulder, CO). This in itself isn't too much of an (addressable) issue. However, a small number of places have concavity and adjacency issues, which together lead to hull overlaps. This is ameriorated by removing outliers, but we should check them (e.g., Cary, NC, Morrisville, NC, the city next to Newark, CA, Roswell, GA)
- Adjacency (23 marked) - The entire of the valley has an adjacency issue (these weren't marked), as do a fairly large number of other cities. See Newport Beach, CA and others. Lexington, MA provides a nice example of containment despite adjacency. As does Cambridge, MA with the right outliers removed.
- Outliers (52 marked) - perhaps as many as 1 in 5 cities had one or two obvious outliers on a visual inspection.
Critical checks:
- Addison, TX: encapsulation
- Culver City, CA: encapsulation
- Oklahoma City, OK: scale issue (one outlier in State House?)
- Portland, ME: scale issue. Though Portland's place boundary contains an island and some sea area, making it very wonky, this isn't an issue.
- San Juan Capistrano, CA: Just 2 locations (1 singleton and 1 multiton) and no hull. Note that we might want to omit this place.
We might also want to check Twin Cities. Here's the results:
place statecode Issue Reason Champaign IL No Urbana isn't in the data Phoenix AZ No Mesa isn't in the data San Francisco CA No Twinned with Oakland! Oakland CA No Twinned with SF! Stamford CT Yes Norwalk Norwalk CT Yes Stamford New Haven CT No Bridgeport isn't in the data Tampa FL No St. Petersburg Portland ME No South Portland isn't in the data Minneapolis MN Yes St. Paul Bloomington MN No Normal isn't in the data Durham NC Yes? Raleigh Raleigh NC Yes? Durham Portland OR No Vancouver isn't in the data Bethlehem PA No Allentown isn't in the data Dallas TX Yes? Fort Worth Fort Worth TX Yes? Dallas Seattle WA No Tacoma isn't in the data
A visual inspection suggests that Stamford and Norwalk might be better combined but don't really matter. Minneapolis and St. Paul are pretty separate and really separate after removing outliers. Rarleigh and Durham are completely separate (Cary is more of an issue), as are Dallas and Fort Worth and SF and Oakland.
Encapsulation
The data suggests that there are 12 places that encapsulated by 7 other places:
SELECT A.place, A.statecode, B.place AS ContainedPlace, B.statecode AS ContainedStatecode
FROM placetigerarea AS A
JOIN placetigerarea AS B ON st_contains(ST_ConvexHull(A.placegeog::geometry),ST_ConvexHull(B.placegeog::geometry))
WHERE NOT (A.place=B.place AND A.statecode=B.statecode);
--12
place statecode containedplace containedstatecode Los Angeles CA Culver City CA Los Angeles CA Torrance CA Los Angeles CA El Segundo CA Los Angeles CA Santa Monica CA San Jose CA Santa Clara CA Fremont CA Newark CA Oakland CA Emeryville CA Cary NC Morrisville NC New York NY Jersey City NJ Dallas TX Richardson TX Dallas TX Addison TX Dallas TX Farmers Branch TX
We could ignore, flag or discard these cites. A visual inspection suggests that Culver City, Torrence, El Segundo, Jersey City, and probably Richardson, Newark, and maybe Cary don't have any issues. Santa Monica, Santa Clara, Emeryville, Farmer's Branch and Addison do look like they have issues, but with the exception of Farmer's Branch and Addison, these are big cites and with lots of locations, so the issue should be washed out by removing outliers or otherwise appropriately choosing the clustering layer.
After reflection, we decided to deal merge the following places (listing geoids):
Santa Monica 0670000 -> LA 0644000 Santa Clara 0669084 -> San Jose 0668000 Emeryville 0622594 -> Oakland 0653000 Farmer's Branch 4825452 -> Dallas 4819000 Addison 4801240 -> Dallas 4819000 Newark 0650916 -> Freemont 0626000 Morrisville 3744520 -> Cary 3710740
Intersecting All Encompassing Hulls
52 places have all encompasing hulls intersect in our data (i.e., there are 26 intersections). This includes some of the places that suffer from encapsulation (especially Santa Monica, Santa Clara, Emeryville, Farmer's Branch and Addison). So beyond encapsulated places, there are an additional 20 intersections. These are:
place statecode intersectedplace intersectedstatecode Alpharetta GA Roswell GA Bellevue WA Redmond WA Boston MA Cambridge MA Boston MA Somerville MA Campbell CA San Jose CA Centennial CO Greenwood Village CO Cupertino CA San Jose CA Fremont CA Newark CA Greenwood Village CO Centennial CO Irvine CA Newport Beach CA Los Altos CA Mountain View CA Menlo Park CA Redwood City CA Milpitas CA San Jose CA Mountain View CA Palo Alto CA Mountain View CA Sunnyvale CA Newton MA Wellesley MA Phoenix AZ Tempe AZ Redwood City CA San Carlos CA San Jose CA Sunnyvale CA Santa Clara CA Sunnyvale CA
At a glance, most of these appear big or very big startup ecosystems. Accordingly, any process that deals with outliers (etc.) should address this issue.
First Estimation(s)
Note that this subsection is now very out of date!
At this stage we have MasterLevels.txt and MasterLayers.txt as datafiles. MasterLevels.txt contains only layers corresponding to levels 0 through 12 and also has noothergeoms and avgdisthm as variables.
The questions we need to answer are: 1) Is there an agglomeration effect? 2) Which level or layer best describes a city (perhaps for a year, or perhaps over its life)?
We can just pick a level (say 25 hectares) and run a within-city regression:
. xtreg growthinv17l_f growthinv17l nosingletonl totmultitoncountl totpaircountl tothullcountl avgpairlengthl avghulldensi
> tyl avgdisthml i.year if level==6, fe cluster(placelevelid)
Fixed-effects (within) regression Number of obs = 5,027
Group variable: placelevelid Number of groups = 198
R-sq: Obs per group:
within = 0.4097 min = 3
between = 0.8310 avg = 25.4
overall = 0.5974 max = 37
F(44,197) = 78.20
corr(u_i, Xb) = 0.4087 Prob > F = 0.0000
(Std. Err. adjusted for 198 clusters in placelevelid)
-----------------------------------------------------------------------------------
| Robust
growthinv17l_f | Coef. Std. Err. t P>|t| [95% Conf. Interval]
------------------+----------------------------------------------------------------
growthinv17l | .1388644 .0176074 7.89 0.000 .1041412 .1735877
nosingletonl | .1447935 .0402488 3.60 0.000 .0654197 .2241673
totmultitoncountl | .0909545 .0481349 1.89 0.060 -.0039714 .1858803
totpaircountl | .1724367 .0383185 4.50 0.000 .0968695 .2480039
tothullcountl | .7120504 .0467915 15.22 0.000 .6197739 .8043269
avgpairlengthl | -.0219417 .023633 -0.93 0.354 -.0685478 .0246645
avghulldensityl | .049566 .0202756 2.44 0.015 .0095808 .0895511
avgdisthml | .0933327 .076309 1.22 0.223 -.0571546 .2438201
Or:
. xtreg growthinv17l_f growthinv17l numstartups numstartupssq nosinglemulti nosinglemultisq nohull nohullsq nopair nopairs
> q i.year if level==6, fe cluster(placelevelid)
Fixed-effects (within) regression Number of obs = 5,773
Group variable: placelevelid Number of groups = 200
R-sq: Obs per group:
within = 0.4017 min = 4
between = 0.8425 avg = 28.9
overall = 0.5708 max = 37
F(45,199) = 72.39
corr(u_i, Xb) = 0.4222 Prob > F = 0.0000
(Std. Err. adjusted for 200 clusters in placelevelid)
---------------------------------------------------------------------------------
| Robust
growthinv17l_f | Coef. Std. Err. t P>|t| [95% Conf. Interval]
----------------+----------------------------------------------------------------
growthinv17l | .220333 .018699 11.78 0.000 .1834595 .2572066
numstartups | .0062875 .0022944 2.74 0.007 .001763 .0108119
numstartupssq | -8.04e-07 1.14e-06 -0.70 0.483 -3.06e-06 1.45e-06
nosinglemulti | .0648575 .0168134 3.86 0.000 .0317023 .0980127
nosinglemultisq | -.0021614 .0006336 -3.41 0.001 -.0034108 -.000912
nohull | .1747691 .0255105 6.85 0.000 .1244636 .2250747
nohullsq | -.0057148 .0012164 -4.70 0.000 -.0081136 -.003316
nopair | .0896908 .0248207 3.61 0.000 .0407455 .1386361
nopairsq | -.0097196 .0024153 -4.02 0.000 -.0144825 -.0049567
Note that the following don't work, either alone or with other variables (including numstartups and numstartupsq), probably because they are third-order effects:
. xtreg growthinv17l_f growthinv17l avghulldensity avghulldensitysq avgpairlength avgpairlengthsq avgdisthm avgdisthmsq i.
> year if level==6, fe cluster(placelevelid)
Fixed-effects (within) regression Number of obs = 5,027
Group variable: placelevelid Number of groups = 198
R-sq: Obs per group:
within = 0.3579 min = 3
between = 0.5926 avg = 25.4
overall = 0.3753 max = 37
F(43,197) = 2152.49
corr(u_i, Xb) = 0.2529 Prob > F = 0.0000
(Std. Err. adjusted for 198 clusters in placelevelid)
----------------------------------------------------------------------------------
| Robust
growthinv17l_f | Coef. Std. Err. t P>|t| [95% Conf. Interval]
-----------------+----------------------------------------------------------------
growthinv17l | .2668427 .0208574 12.79 0.000 .2257101 .3079752
avghulldensity | .0008076 .0003875 2.08 0.038 .0000433 .0015718
avghulldensitysq | -1.14e-07 8.80e-08 -1.29 0.197 -2.87e-07 5.97e-08
avgpairlength | -.0018724 .0036128 -0.52 0.605 -.0089972 .0052524
avgpairlengthsq | -.0000296 .0000596 -0.50 0.620 -.0001471 .0000879
avgdisthm | .001429 .0035371 0.40 0.687 -.0055465 .0084045
avgdisthmsq | -.000012 .0000157 -0.76 0.447 -.0000429 .000019
We can also do it with fractions and their squares (omit fracsinglemulti). However at level 6 (25 hectare), pairs seems more important than hulls:
. xtreg growthinv17l_f growthinv17l numstartups numstartupssq fracpair fracpairsq frachull frachullsq i.year if level==6,
> fe cluster(placelevelid)
Fixed-effects (within) regression Number of obs = 5,773
Group variable: placelevelid Number of groups = 200
R-sq: Obs per group:
within = 0.3919 min = 4
between = 0.8456 avg = 28.9
overall = 0.5274 max = 37
F(43,199) = 62.34
corr(u_i, Xb) = 0.4268 Prob > F = 0.0000
(Std. Err. adjusted for 200 clusters in placelevelid)
-------------------------------------------------------------------------------
| Robust
growthinv17~f | Coef. Std. Err. t P>|t| [95% Conf. Interval]
--------------+----------------------------------------------------------------
growthinv17l | .2481436 .0181447 13.68 0.000 .2123631 .283924
numstartups | .0100673 .0019792 5.09 0.000 .0061644 .0139702
numstartupssq | -6.92e-06 2.03e-06 -3.41 0.001 -.0000109 -2.92e-06
fracpair | .7540177 .3709212 2.03 0.043 .0225772 1.485458
fracpairsq | -1.936 .7030942 -2.75 0.006 -3.322472 -.5495289
frachull | .1969853 .562807 0.35 0.727 -.9128457 1.306816
frachullsq | -.1491389 .3878513 -0.38 0.701 -.9139649 .615687
Whereas across all levels:
. xtreg growthinv17l_f growthinv17l numstartups numstartupssq fracpair fracpairsq frachull frachullsq i.year, fe cluster(p
> lacelevelid)
Fixed-effects (within) regression Number of obs = 76,623
Group variable: placelevelid Number of groups = 2,600
R-sq: Obs per group:
within = 0.3956 min = 4
between = 0.8330 avg = 29.5
overall = 0.5279 max = 37
F(43,2599) = 827.33
corr(u_i, Xb) = 0.4143 Prob > F = 0.0000
(Std. Err. adjusted for 2,600 clusters in placelevelid)
-------------------------------------------------------------------------------
| Robust
growthinv17~f | Coef. Std. Err. t P>|t| [95% Conf. Interval]
--------------+----------------------------------------------------------------
growthinv17l | .2522524 .0049725 50.73 0.000 .2425019 .2620028
numstartups | .0100677 .0005323 18.91 0.000 .0090239 .0111114
numstartupssq | -6.95e-06 5.51e-07 -12.62 0.000 -8.03e-06 -5.87e-06
fracpair | .4152028 .0956859 4.34 0.000 .2275745 .6028311
fracpairsq | -.9753654 .1271631 -7.67 0.000 -1.224717 -.7260141
frachull | -.8606939 .1231519 -6.99 0.000 -1.10218 -.6192081
frachullsq | .495785 .0976557 5.08 0.000 .3042942 .6872758
This is probably because of the variation in hulls vs pairs at level 6, which has lots of cities with nothing in pairs and everything in hulls. We might want to 'control' for cityarea by restricting our within city analysis to large enough cities. A 25 hectare target area might be too encapsulating -- more than 10% of observations are 100% in hulls:
. su frachull if level==6, det
frachull
-------------------------------------------------------------
Percentiles Smallest
1% .2162162 .1153846
5% .3333333 .1153846
10% .4285714 .1428571 Obs 6,032
25% .6 .1428571 Sum of Wgt. 6,032
50% .8 Mean .7539126
Largest Std. Dev. .2209328
75% .9666666 1
90% 1 1 Variance .0488113
95% 1 1 Skewness -.6390206
99% 1 1 Kurtosis 2.400947
I tried using R2 to select levels, but only the second spec had an interior solution (at level 3):
forvalues i=1/12 {
quietly capture xtreg growthinv17l_f growthinv17l nosinglemulti nosinglemultisq nohull nohullsq nopair nopairsq avghulldensity avghulldensitysq avgpairlength avgpairlengthsq avgdisthm avgdisthmsq i.year if level==`i', fe cluster(placelevelid)
display "Reg: 1 level: " `i' " r2-within: " `e(r2_w)'
}
forvalues i=1/12 {
quietly capture xtreg growthinv17l_f growthinv17l nosinglemulti nosinglemultisq nohull nohullsq nopair nopairsq i.year if level==`i', fe cluster(placelevelid)
display "Reg: 2 level: " `i' " r2-within: " `e(r2_w)'
}
forvalues i=1/12 {
quietly capture xtreg growthinv17l_f growthinv17l numstartups numstartupssq fracsinglemulti fracsinglemultisq fracpair fracpairsq frachull frachullsq i.year if level==`i', fe cluster(placelevelid)
display "Reg: 3 level: " `i' " r2-within: " `e(r2_w)'
}
Reg: 2 level: 1 r2-within: .39552569 Reg: 2 level: 2 r2-within: .3998779 Reg: 2 level: 3 r2-within: .40348691 Reg: 2 level: 4 r2-within: .40130097 Reg: 2 level: 5 r2-within: .39931203 Reg: 2 level: 6 r2-within: .39707046 Reg: 2 level: 7 r2-within: .39366909 Reg: 2 level: 8 r2-within: .38957831 Reg: 2 level: 9 r2-within: .38398108 Reg: 2 level: 10 r2-within: .37662604 Reg: 2 level: 11 r2-within: .36999057 Reg: 2 level: 12 r2-within: .38393843
However, doing this by exgroup (0 t0 3), gives the same result - level 3 - for each exgroup.
Alternative approaches are to use AIC/BIC, or maybe entropy. For the same set of variables, in the same model, AIC/BIC are minimized when R2 is maximized, they are only useful when choosing the combination of the variables/estimation and the level. And it seems we can only do entropy one variable at a time:
entropyetc nohull if level==1
TIF data
See the TIF Project page for details on the TIF data. The section that was originally on this page was moved there.
TIF Analysis
Using Burlington, VT at the elbow, we plotted the hulls and TIFs. This is in WorkingMapV2.mxd. Some potential measures include:
- Overlapping Hull and TIF area
- Fraction of Hull area covered by TIFs
- Non-overlapping Hull and TIF area
- Adjacent Hull and TIF area (and non-adjacent) -- expand out hull area to allow for new inclusion without affecting density
- Count or Fraction of locations in TIF areas
The data needs to be reprocessed to be in the format:
place statecode year tifname geog
Or at least start-year and end-year...
Plotting Chicago (-87.7, 41.9) in 2017 using chosenlayer (layer=92) reveals some insights. There aren't any TIFs in the city core, but there are lots of startups. And conversely likewise, there are lots of TIFs covering suburbs that have few if any startups. There are, however, some areas of overlap. And some possible pattern of startups appearing exactly where TIFs aren't -- In a few cases (one notable), the startups are essentially surrounded.
And Houston in 2017, using layer=20 (as no chosen exists and 20 has max nohull at 7), it seems that there is little overlap between hulls and TIRZ but considerable overlap between Rice's "Innovation Corridor". The Sears Building, at (29.7255505,-95.3887225) [19] and Houston Exponential's building at (29.7521572,-95.3778919) [20] are both in the Midtown TIF, albeit at opposite ends! There are other TIFs impacted by Rice's proposal too. The East Downtown, Market Square, Montrose, and at least three others all intersect the "planned" innovation corridor.
Note that The Sears Building Area wasn't in the Midtown TIF when they did the last bond issue in 2015 (see map on A-1 [21]). They raised $13.5m in 2015 to pay off existing debt, and then raised $39.31m in 2017 [22] to conduct the Plan, pay off debt, etc. The area was in the map in the 2017 issue. The area around the Sears building "contains virtually no taxable property and therefore will produce no significant Captured Appraised Value".
Density Maps
It's useful to lay each year's chosen hulls on top of each other over time (from say 1995 to present, or using the layer with the max number of hulls if the year never achieves the chosen hull count). However, to do this we should expand the hulls, because all hulls have points at their corners and most hulls have points only at their corners. I propose using ST_Expand to increase X and Y distances separately. The method would be to take ((Centroid's X-ST_XMin)+(ST_Xmax-Centroid's X)/2) as the X expansion distance and likewise for Y.
Correction - we definately don't want ST_Expand as it creates a bounding box. We want ST_Buffer, but how big a buffer? Half of the maximum width is easy.
ST_Length(ST_LongestLine( (SELECT geom FROM mylayer WHERE gid=1), (SELECT geom FROM mylayer WHERE gid=1))
Also, transparency doesn't stack within a layer... See https://gis.stackexchange.com/questions/91537/how-to-vary-the-transparency-of-symbols-within-a-single-layer-in-arcmap Rather than half of the maximum width, we could use the average distance from a corner to another corner (i.e., pretty much between locations) divided by two. Use ST_DumpPoints(geometry geom) to recover the corners of the convex hulls. We should also put some other places on the map (long,lat):
- Mercury Fund [23] at (-95.4306675,29.7331018)
- The Galleria [24] at (-95.4627705,29.7411474).
- The center of Downtown [25] at (-95.3755815,29.7575263)
- Rice University [26] at (-95.4040199,29.7173941)
- The Energy Corridor [27] at (-95.7131468,29.8698068)
- Houston Community College - Spring Branch Campus [28] at (-95.5631846,29.7841191)
- Westchase Neighborhood [29] at (-95.5832518,29.72609)
- Houston Community College Alief Hayes Campus [30] at (-95.5770254,29.7336065)
Visually, it is easy to layer the years, using opacity to build up an effect over time. In the data, it is more difficult. Each year could have thickness one and then we could count the number using ST_intersects while creating the new hulls using ST_Intersection (returns null when no interection). If there are more than one intersections with the highest intersects count, then we could take the largest one as the ultimate one. The centroid of the ultimate intersection would be the heart of a city's startup scene.
I also added the roads from the Tiger Line Shapefile for Harris County[31]:
shp2pgsql -c -D -s 4269 -W "latin1" -I tl_2013_48201_roads.shp tlharris | psql -U researcher -d vcdb3
As well as the US national file for the coastlines:
shp2pgsql -c -D -s 4269 -W "latin1" -I tl_2017_us_coastline.shp tlcoastline | psql -U researcher -d vcdb3
Unfortunately, this doesn't show lakes... You can get all lines from https://www.census.gov/cgi-bin/geo/shapefiles/index.php?year=2019&layergroup=All+Lines
But you have to do them county by county.
shp2pgsql -c -D -s 4269 -W "latin1" -I tl_2019_50007_edges.shp tlchittenden | psql -U researcher -d vcdb3
And there's so many features...
One problem with this method is that there are partial intersections. We could use ST_Difference to return the part that doesn't intersect... a bigger problem is that we are restricted to pairs of geometries. Using a cross product we could test all rows against all other rows. But then we'd need to aggregate the intersections... One method is to use a recursive CTE [32]. ST_Union is truly an aggregate function but not what we want in this context.
Another thing that might be an issue is that when hulls are expanded, they may intersect within a year too. Counting across year and within year intersections the same would simplify this, but it might be important to track them separately?
Other
See also:
Old Work Using Circles
Very Old Summary
Agglomeration is generally thought to be one of the most important determinants of growth for urban entrepreneurship ecosystems. However, there is essentially no empirical evidence to support this. This paper takes advantage of geocoding and introduces a novel measure of agglomeration. This measure is the smallest circle area that covers all startup offices, subject to having at least N startups in each circle. Using GIS data on cities, this paper controls for the density and socio-demographics of an area to identify the effect of just agglomeration.
Description
Clusters of economic activity plays a significant role in the firms performance and growth. An important driver of growth is the knowledge spillover between firms. This includes among others the facilitation of information flow and ideas between firms which could be a milestone especially in the growth of startup firms or small businesses. This project focuses on the effects of agglomeration on the performance and growth of startup firms. It introduces a novel measure of agglomeration which can be used to empirically test the effects of clustering. This measure the is smallest total circle area that covers all of the startups in the sample such that there are at least n firms in each circle. The projects is based on the creation of an algorithm which gives an unbiased measure to be used in the empirical analysis. The regression we are interested in takes the following form:
The dependent variable is a measure of growth of the firms. This measure could be investment forwarded one period or growth in investment. The control variables include the number of the startups firms, m, the agglomeration measure, A and a vector of other control variables affecting the growth of firms at time t. Because of the endogeneity in the circle area or the measure of agglomeration, A, there is a need for an instrumental variable to get consistent estimates of the effects we are interested in. The proposed instrument is the presence of a river, or road in between the points representing geographical locations of the venture capital backed up firms. The instrument affects agglomeration without having a direct impact on the growth. This makes it good candidate for a valid instrument. The next tasks are determining the additional control variables to include in the regression, years to include in the analysis and methods of finding an unbiased measure of agglomeration.
Data
Making the circle input data
Ed's additional datawork is in
Z:\VentureCapitalData\SDCVCData\vcdb2\ProcessingCoLevelSimple.sql
The key table for circle processing is CoLevelBlowout, which is restricted (to include cities with greater than 10 active at some point in the data) to make CoLevelForCircles.
We need to:
- Winsorize CoLevelBlowout
- Compute the circles!
- Make the Bay Area (over time) data
- Plot the Bay Area data (with colors per Bay Area city) for 1985 to present
- Combine the plots to make an animated gif
To winsorize the data we need the formula for Great Circle Distance. The radius of the earth is 6,378km (half of diameter: 12,756 km). So:
GCD = acos( sin(lat1) x sin(lat2) + cos(lat1) x cos(lat2) x cos(long1-long2) ) x r
Main Sources
The primary sources of data for this project are:
- SDC VentureXpert - from VC Database Rebuild, the key table is
- GIS City Data
- Data on NSF, NIH, population, income, clinical trials, employment, schooling, R&D expenditures and revenue of firms can be found in Hubs.
VC data
Data on the number of new vc backed firms in each city and year is in:
Z:\Hubs\2017\clean data The name of the file is firm_nr.txt.
Database is cities SQL script is: nr_firms.sql
Raw data is in:
Z:\VentureCapitalData\SDCVCData\vcdb2 The file is colevelsimple.txt
In order to see if there are outliers, I get the average coordinates for all cities and find the differences of the firm's coordinates from the city coordinate. The script for the average city coordinates is in
Z:\Hubs\2017\sql scripts and the file name is newcolevel.sql.
The differences are taken in excel. The file containing the differences is in
Z:\Hubs\2017 and the file name is new_colevel.txt.
- Data on the circle area in each city and year is in:
Z:\Hubs\2017\clean data The name of the file is circles.txt. (It contains only 106 observations)
Database is cities SQL script is: circles.sql
The script for joining the two tables on the VC table is in:
Z:\Hubs\2017\sql scripts The name of the file is new_firm_nr_circles.sql
- We use the cities with greater than 10 active VC backed firms. Data on the cities and number of active firms is in:
E:\McNair\Projects\Hubs\Summer 2017 The file is CitiesWithGT10Active.txt
The script for joining the final data with this file is located in
Z:\Hubs\2017\sql scripts The file name is final_joined_kerda.sql.
The final data is in
Z:\Hubs\2017\clean data The file name is new_final_kerda.txt.
Accelerator data
Accelerators data is in
Z:\Hubs\2017\clean data The file name is accelerators.txt The table is accelerators
The joined accelerators data with the VC table is in joined_accelerators table. The script is in
Z:\Hubs\2017\sql scripts The file name is join_accelerators.sql
The do file is in
Z:\Hubs\2017\kerda The name is agglomeartion_kerda.do
It includes the graphs, tables and the preliminary FE regressions with VC funding amount and growth rate. It also predicts the hazard rates, matches on the hazard rate in order to create synthetic control and treatment groups. What is left to do is to add 2 lagged and 3 forward observations for the cities which do have a match. Remove the overlapping observations for the years that get a treatment but which at the same time serve as a control.
See also
Also:
- Enclosing Circle Algorithm
- Normalizer
- Geocode.py
Entrepreneurship, small businesses and economic growth in cities:
Specifities/ Outliers to consider
New York (decompose) Princeton area (keep Princeton unique) Reston, Virginia (keep) San Diego (include La Jolla) Silicon Valley (all distinct)
Unbiased measure
The number of startups affects the total area of the circles according to some function. The task is to find an unbiased measure of the area, which is not affected by the number of the startups, given the size and their distribution.
For the unbiased calculation of a measure in a different context see: http://users.nber.org/~edegan/w/images/d/d0/Hall_(2005)_-_A_Note_On_The_Bias_In_Herfindahl_Type_Measures_Based_On_Count_Data.pdf
Census Data
Population
The Census Gazetteer files for 2010, 2000 and 1990 can give use population by census place. See https://www.census.gov/geo/maps-data/data/gazetteer.html
The places file contains data for all incorporated places and census designated places (CDPs) in the 50 states, the District of Columbia and Puerto Rico as of the January 1, 2010. The file is tab-delimited text, one line per record. Some records contain special characters. Download the National Places Gazetteer Files (1.2MB) Download the State-Based Places Gazetteer Files: Column Label Description Column 1 USPS United States Postal Service State Abbreviation Column 2 GEOID Geographic Identifier - fully concatenated geographic code (State FIPS and Place FIPS) Column 3 ANSICODE American National Standards Insititute code Column 4 NAME Name Column 5 LSAD Legal/Statistical area descriptor. Column 6 FUNCSTAT Functional status of entity. Column 7 POP10 2010 Census population count. Column 8 HU10 2010 Census housing unit count. Column 9 ALAND Land Area (square meters) - Created for statistical purposes only. Column 10 AWATER Water Area (square meters) - Created for statistical purposes only. Column 11 ALAND_SQMI Land Area (square miles) - Created for statistical purposes only. Column 12 AWATER_SQMI Water Area (square miles) - Created for statistical purposes only. Column 13 INTPTLAT Latitude (decimal degrees) First character is blank or "-" denoting North or South latitude respectively Column 14 INTPTLONG Longitude (decimal degrees) First character is blank or "-" denoting East or West longitude respectively.
Relationships
See https://www.census.gov/geo/maps-data/data/relationship.html
These text files describe geographic relationships. There are two types of relationship files; those that show the relationship between the same type of geography over time (comparability) and those that show the relationship between two types of geography for the same time period.
ACS (American Community Survey) Data
Steps to download:
1) Go to https://factfinder.census.gov/faces/nav/jsf/pages/download_center.xhtml 2) Select 'I know the dataset or table(s) that I want to download.' 3) Press Next 4) For 'Select a program:' choose 'American Community Survey' 5) For 'Select a dataset and click Add to Your Selections:' choose '<YEAR OF INTEREST> ACS 1-year estimates' 6) Press 'Add To Your Selections' 7) Press Next 8) For 'Select a geographic type:' choose 'Place - 160' 9) For Select a state: Don't choose a state, as we wish to download all. 10) For 'Select one or more geographic areas...' choose 'All Places within United States and Puerto Rico' 11) Press Next
Other
Counts of firms by NAICS code at the county level may be useful: https://www2.census.gov/geo/pdfs/education/cbp12gdbs.pdf
Tax Increment Finance Zones
- State by state enabling statues: https://www.cdfa.net/cdfa/tifmap.nsf/index.html
